Genuine Portable EVSE Mains Charger / Mode 2 Charging Cable (IC-CPD Mode 2 Charging Cable) – Aptiv / VW AG – 1EA971675AL
Factory mobile charging station for plug-in electric and hybrid vehicles (In-Cable Control and Protecting Device – IC-CPD / Mode 2), manufactured for the Volkswagen AG Group by renowned supplier Aptiv Services Deutschland GmbH.
100% genuine OEM part, supplied as factory equipment for models in the Volkswagen ID. family and related VAG electric vehicles based on the dedicated MEB electric vehicle platform (as well as MQB PHEV hybrids). Enables safe charging of the traction battery from a standard household 230V (Schuko / Type E/F) mains socket at 10A (charging power 2.3 kW).
Equipped with an advanced Type A + DC 6mA RCD protection module (integrated detection of AC 30mA and DC 6mA leakage currents), a temperature sensor in the mains plug to prevent the household socket from overheating, automatic relay contact self-diagnostics, and a sealed enclosure rated IP65 / IP67 for indoor and outdoor use.
Technical specifications (read directly from the rating plate):
-
Main OE part number (VW AG):
1EA971675AL/1EA 971 675 AL(VP/N) -
Part number / Manufacturer model (Aptiv):
AP/N: 35543281/Model: 35543281 -
Accessory manufacturer: Aptiv (Aptiv Services Deutschland GmbH, Wuppertal / Aptiv Electrical Centers Shanghai)
-
Device type: IC-CPD (In-Cable Control and Protecting Device according to IEC 61851 and IEC 62752)
-
Rated voltage: 230V AC (single-phase)
-
Mains frequency: 50Hz
-
Rated charging current: 10A
-
Maximum charging power: 2.3 kW
-
Residual-current protection (IΔn): AC 30mA / DC 6mA (built-in protection against AC and DC leakage currents)
-
Enclosure protection rating (Box Sealing Class): IP65 / IP67 (fully resistant to water, dust, and weather conditions)
-
Vehicle-side connector: Type 2 (Mennekes / IEC 62196-2)
-
Mains-side connector: Standard 230V mains plug (Schuko / Uni-Schuko CEE 7/7 with earth)
-
Operating status indicators: Diagnostic panel with LEDs indicating power and charging status, as well as any faults in the household power supply, control module, or vehicle
-
Condition: Original used part (housing intact, with no cracks, rating label legible, thick factory wires with yellow protective sheathing are flexible and undamaged)
Vehicle compatibility (MEB / MQB platform – Type 2 socket):
Volkswagen:
-
ID.3 (type E11) – model years 2020 to 2026+
-
ID.4 / ID.4 GTX (type E21) – model years 2020 to 2026+
-
ID.5 / ID.5 GTX (type E39) – model years 2021 to 2026+
-
ID.7 / ID.7 Tourer (type ED2) – model years 2023 to 2026+
-
ID. Buzz / ID. Buzz Cargo (type EB) – model years 2022 to 2026+
-
e-Golf / e-Up! – all model years with a Type 2 connector
-
Passat B8 GTE / Golf 7 GTE / Golf 8 GTE / Tiguan eHybrid / Arteon eHybrid (plug-in hybrids)
Škoda:
-
Enyaq iV / Enyaq Coupe iV (type 5AC / 5AZ) – model years 2020 to 2026+
-
Superb III iV / Octavia IV iV (PHEV hybrid models)
Cupra & Seat:
-
Cupra Born (type K11) – model years 2021 to 2026+
-
Cupra Tavascan – model years 2024 to 2026+
-
Cupra Formentor e-Hybrid / Leon e-Hybrid
-
Seat Mii electric / Tarraco e-Hybrid
Audi:
-
Q4 e-tron / Q4 Sportback e-tron (type F4B) – model years 2021 to 2026+
-
A3 Sportback TFSI e / Q3 TFSI e / Q5 TFSI e
(Note: The 1EA prefix assigns the part directly to the factory program for Volkswagen ID models. Thanks to the standard Type 2 (Mode 2) connector, the charger is fully compatible with all European electric and PHEV hybrid vehicles equipped with a Type 2 Mennekes socket).