Original Left Outer Rear Light (in Fender) LED – Cupra Formentor – 5FF945207

Original factory outer rear light mounted in the left / driver-side fender panel in full LED technology (left rear light in the bodywork / outer combined rear light – Heckleuchte Seitenwand Links LED / Rear Outer Tail Light), designed for Cupra Formentor (type KM7) models produced from 2020 to 2026, including versions with 1.5 TSI, 2.0 TSI (190 hp, 245 hp, 310 hp VZ) engines, the top-of-the-range five-cylinder VZ5 (2.5 TFSI / 390 hp), 2.0 TDI diesel variants, and e-HYBRID hybrid versions (1.4 e-HYBRID / 1.5 e-HYBRID), based on the modular MQBevo platform.

Original VAG group exterior lighting component. Made of high-impact technical PMMA/ABS plastic resistant to UV radiation, fading, discoloration from sunlight, and chemicals from touchless car washes. It features an aggressive, geometric light signature, which when switched on perfectly aligns in a single line with the central light strip on the tailgate (the characteristic coast-to-coast light line of the Cupra brand). The housing is equipped with a complete, flexible micro-rubber perimeter seal, which effectively protects the fender cavity and wiring harness from moisture and dirt. The light has full European road approval ECE (E-Mark / E9) allowing for right-hand traffic with a dynamic yellow indicator.

Technical specifications:

• Catalog part number (OE): 5FF945207 / 5FF 945 207 (and related revisions from the 5FF945207A, 5FF945207B, 5FF945095; the right passenger side is available under the even number 5FF945208 / 5FF945096)

• System / Category: Vehicle exterior lighting / Outer rear lights in the fender, LED combined lights (Outer Rear Tail Light LED / Heckleuchte Links Außen)

• Mounting side: Rear – left side (driver-side fender – outer bodywork part)

• Technology: Full LED (LED position light guides, brake light and dynamic LED indicator)

• Market version: European (ECE – factory yellow/orange indicator)

• Component contents:

  • Lens with light housing and integrated factory LED modules

  • Factory foam seal fitting against the fender edge

  • Original plug socket with undamaged pins

• Approval: European E (E-Mark) embossed on the lens

• Mounting location: Left rear fender corner (outer part of the multi-part light strip)

• Dedicated model: Cupra Formentor (type KM7)

• Production years: from 2020 to 2026 (all engine and styling versions: Standard, VZ, VZ5, e-HYBRID)

• Steering side: Left (LHD) and Right (RHD) – universal component for the European version

• Condition: Original part, used (100% functional – in very good condition, clean lens without cracks, without deep scratches and without fading, mountings and positioning pins fully intact, LED diodes and light guides shine evenly at full power)

• Manufacturer: Cupra / SEAT S.A. / VAG (Original OEM)

Main application:

• Cupra:

  • Formentor (type KM7) – model years from 2020 to 2026 (all variants: 1.5 TSI, 2.0 TSI, 2.0 TDI, e-HYBRID, VZ 245/310, VZ5)

(Note: Light mounted in the fender panel – it is the outer left rear light element. It does not replace the inner lights or the central light strip mounted in the tailgate).

Fitment guarantee and VIN verification

Each light undergoes a module power continuity check before shipping, light guide color uniformity verification, and mounting clip inspection.

Fitment / mounting tip: The initial designation 5FF (lighting group 945 / 207) defines the left fender corner light designed exclusively for the Cupra Formentor model. Installation is direct (Plug & Play): after removing the side inspection cover in the trunk, unscrew the mounting element and slide the light out of the ball sockets in the fender. Using the original OEM light guarantees a perfect parting line with the tailgate gap, full sealing without fogging, and perfect color consistency with the central blend strip on the tailgate. Before purchase, we recommend comparing the OE number on the rear housing or verifying it using the vehicle's VIN.